The Effect of Travel and Rotational Speeds on the Mechanical Properties of Al2024 in Underwater Friction Stir Welding
- سال انتشار: 1396
- محل انتشار: مجله مواد دوستدار محیط، دوره: 1، شماره: 2
- کد COI اختصاصی: JR_JEFM-1-2_003
- زبان مقاله: انگلیسی
- تعداد مشاهده: 491
نویسندگان
University Complex Materials and Manufacturing Technologies of Maleke Ashtar University, Tehran, Iran.
Department of Materials Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
University Complex Materials and Manufacturing Technologies of Maleke Ashtar University, Tehran, Iran.
Materials Science and Engineering Department, Sharif University of Technology, Tehran, Iran.
چکیده
In this research, the friction stir welding was performed underwater in order to evaluate and improve the mechanical properties of aluminum 2024 alloy. Welding samples were compared with the samples in the air welding. The results showed that samples of the underwater welding in case the rotational speed is 1000 RPM and feed rate is in 80 mm/min, has the highest tensile strength, also they obtain the highest hardness at a rotational speed of 1000 RPM and forward speed of 100 mm/min. Also, an increase of travel speed reduces deformation of the material, heat input and soft area width during the welding process and increases hardness of TMAZ and HAZ. With increasing rotational speed, heat input and soft area width increased. This will, on the one hand, decrease the hardness of TMAZ and HAZ and, on the other hand, increase the stiffness of the disturbance area. Increasing hardness also ultimately improves the tensile strength of the welding joint.کلیدواژه ها
Underwater Friction-Stir Welding, Al2024, Travel Speed, Rotational speedاطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.