Anisotropy in Elastic Properties of Porous 316L Stainless Steel Due to the Shape and Regular Cell Distribution

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 323

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJMF-6-1_006

تاریخ نمایه سازی: 18 تیر 1398

چکیده مقاله:

In this study, two-dimensional finite element modeling was used to study the simultaneous effect of the cell shape and regular cell distribution on the anisotropy of the elastic properties of 316L stainless steel foam. In this way, the uniaxial compressive stress-strain curve was predicted using a geometric model and fully solid 316L stainless steel. The results showed that the elastic tangent and the yield strength increase significantly if the direction of the loading is parallel to the major cell dimension. Besides, the regular cell distribution affects the above properties, and the sharp drop in the mechanical properties is observed when the maximum shear stress plane is parallel with the plane including higher cell density. In addition, the finite element modeling showed that the elastic properties of porous 316L stainless steel are anisotropic and the optimum conditions depend entirely on the shape of the cells and the loading direction in the regular cell distribution foam.

کلیدواژه ها:

Cell shape ، Regular cell distribution ، Anisotropy ، 316L stainless steel foam

نویسندگان

M. Mirzaee

Department of Materials Science and Engineering, Shiraz University, Shiraz, Iran

M.H. Paydar

Department of Materials Science and Engineering, Shiraz University, Shiraz, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • E.A. Basir, K. Narooei, Simulation of Deformation Behavior of Porous ...
  • N. Bekoz, E. Oktay, Mechanical properties of low alloy steel ...
  • a.-H.H. Benouali, L. Froyen, T. Dillard, S. Forest, F. N’guyen, ...
  • Y. Mu, G. Yao, H. Luo, Effect of cell shape ...
  • Y. Mu, G. Yao, Anisotropic compressive behavior of closed-cell Al-Si ...
  • Y. Mu, G. Yao, H. Luo, Anisotropic damping behavior of ...
  • A. Manonukul, P. Srikudvien, M. Tange, C. Puncreobutr, Geometry anisotropy ...
  • M. Mirzaei, M.H. Paydar, Compressive behavior of double-layered functionally graded ...
  • M. Mirzaei, M.H. Paydar, A novel process for manufacturing porous ...
  • L.J. Gibson, M.F. Ashby, Cellular solids: structure and properties, Cambridge ...
  • A. Elmoutaouakkil, L. Salvo, E. Maire, G. Peix, 2D and ...
  • K. McCullough, N. Fleck, M. Ashby, Uniaxial stress–strain behaviour of ...
  • R.K. Desu, H.N. Krishnamurthy, A. Balu, A.K. Gupta, S.K. Singh, ...
  • I. Standard, INTERNATIONAL STANDARD Mechanical testing of metals - Ductility ...
  • R.W. Hertzberg, R.P. Vinci, J.L. Hertzberg, Deformation and Fracture Mechanics ...
  • M. Mirzaei, M.H. Paydar, Fabrication and Characterization of Core–Shell Density-Graded ...
  • H. Shen, L.C. Brinson, Finite element modeling of porous titanium, ...
  • M. Alizadeh, M. Mirzaei-Aliabadi, Compressive properties and energy absorption behavior ...
  • B. Jiang, N. Zhao, C. Shi, J. Li, Processing of ...
  • نمایش کامل مراجع