Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance
- سال انتشار: 1396
- محل انتشار: فصلنامه هیدروژن و پیل سوختی ایران، دوره: 4، شماره: 4
- کد COI اختصاصی: JR_IJHFC-4-4_002
- زبان مقاله: انگلیسی
- تعداد مشاهده: 480
نویسندگان
Department of Mechanical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
Department of Mechanical Engineering, Faculty of Engineering, University of Zabol, Zabol, Iran
Department of Mechanical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
چکیده
In a polymer membrane fuel cell more than half of the chemical energy of hydrogen is converted to heat during generation of electricity. This causes an increase in the cell temperature. The Cooling field design has a significant role in cell cooling. The cell s performance and stability are reduced due to inappropriate heat dissipation. In this paper, the cooling flow and heat transfer in cooling plates with parallel channels in the polymer membrane fuel cell are simulated and a parametric study of the influence of cooling channels dimensions on the fuel cell thermal performance is performed based on three indexes: maximum surface temperature cooling (Tmax), the temperature uniformity on the surface (Ut), and pressure drop. Numerical results show that increasing the depth of the channels has an adverse effect on temperature characteristic; inaddition, the pressure drop decreases. Therefore, regarding constructional limitations and mechanical strength, use of channels with a depth of 1 mm is recommended. Increasing the width of the channels decreases the maximum surface temperature of the cooling plate, the temperature uniformity index, and the pressure drop. However, increasing the channel width more than 3 mm does not have a significant effect on the cooling performance. Increasing the distance between two channels adversely effects the thermal parameters as well as increases the pressure drop. Therefore, the distance between two cooling channels should not be more than 2 mm.کلیدواژه ها
polymer membrane fuel cell, cooling flow field, The temperature distribution, Uniform temperature distribution, Pressure drop, Parametric studyاطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.