Properties of the Interface of a Carbon Nano-Composite in Hyperelastic Matrix
محل انتشار: سومین کنفرانس نانوساختارها
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,551
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS03_298
تاریخ نمایه سازی: 21 دی 1388
چکیده مقاله:
The interface of a carbon nano-composite plays a large role in determining the effective response of the composite, since it is the medium through which load transfer occurs. The properties of the interface in hyperelastic matrix are different from linear elastic materials. Since the initial elastic stiffness of the hyperelastic material is in the order of MPa as against the order of GPa for the elastic case. Hyperelastic materials are described in terms of a “strain energy potential,” which defines the strain energy stored in the material per unit of reference volume (volume in the initial configuration) as a function of the strain at that point in the material. It is necessary to understand how the variation of interfacial properties affects the overall behaviour of the composite. In this work, the interface of a uniaxially reinforced composite representative volume element (RVE) is modeled using the cohesive zone modeling (CZM) approach. A three parameter bilinear traction separation relationship is used to characterize the interface and the effect of variation of these parameters on the response of the composite is studied. The matrix is modeled as a hyperelastic material. The importance of each interfacial parameter on the effective behavior of the composite is investigated.
کلیدواژه ها:
نویسندگان
M Motamedi
Department of Mechanical Engineering, University of Tehran, Tehran, ۶۱۱۱۴۰۳۳, Iran,
M Mosavi Mashhadi
Department of Mechanical Engineering, University of Tehran, Tehran, ۶۱۱۱۴۰۳۳, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :