Morphology and mechanichal properties of Polyacrylonitrile (PAN) Multi Walled Carbon Nanotube (MWNT) nanocomposite electrospun fibers
محل انتشار: سومین کنفرانس نانوساختارها
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,726
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS03_094
تاریخ نمایه سازی: 21 دی 1388
چکیده مقاله:
The morphology and mechanical properties of PAN-MWNTs fibers were studied here. The electrospinning process was used to produce fiber in micro and nanoscale. Dispersion of MWNTs in polymer solution is the key factor to obtain good results in final product, so its condition was investigated using solvent film SEM images. The morphological study in fiber mat showed that by increasing the amount of MWNTs in polymer from 0 to 1%, the surface roughness of fibers was affected. In mechanical characterization it was observed, increasing the percentage of MWNTs in fiber improved this properties about 50% in fiber mat.
کلیدواژه ها:
نویسندگان
M Yousefzadeh
Department of Textile Engineering, Amirkabir University of Technology, Tehran
M Latifi
Department of Textile Engineering, Amirkabir University of Technology, Tehran