Formation of MoSi2-CrSi2 Nanocomposite Powder by milling and Following heat treatment
محل انتشار: سومین کنفرانس نانوساختارها
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,288
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS03_003
تاریخ نمایه سازی: 21 دی 1388
چکیده مقاله:
MoSi2-CrSi2 nanocomposite powder was successfully synthesized by ball milling of Mo, Si and Cr elemental powders. Effects of the Cr content, milling time and annealing temperature were studied. X-ray diffraction (XRD) was used to characterize the milled and annealed powders. The morphological and microstructural evolutions were studied by transmission electron microscopy (TEM).HTP of MoSi2 begins to form after 50 h of milling and completes after 70 h of milling. MoSi2-CrSi2 composite powder was also prepared with a combination of short milling time (50 h) and low temperature annealing (850c) Annealing led to the HTP to LTP transformation of MoSi2.MoSi2-CrSi2 nanocomposite powder with the mean grain size less than 50 nm was obtained at the end of milling. This composite maintained its nanocrystalline nature after annealing.
کلیدواژه ها:
نویسندگان
S.A Mirvakili
Materials and Energy Research Center
R Yazdani-rad
Materials and Energy Research Center
M Zakeri
Islamic Azad University (Saveh Branch)