ADVANTAGES OF USING HIGH PERFORMANCE CONCRETE IN PARTIALLY PRESTRESSED BEAMS AND OPTIMIZATION OF PARTIALLY PRESTRESSED RATIO
- سال انتشار: 1388
- محل انتشار: دومین کنفرانس بین المللی مقاوم سازی لرزه ای
- کد COI اختصاصی: ICSR02_173
- زبان مقاله: انگلیسی
- تعداد مشاهده: 382
نویسندگان
Ordu University Department of Civil Engineering, ۵۲۲۰۰, Ordu, TURKIYE
Karadeniz Technical University Department of Civil Engineering, ۶۱۰۸۰, Trabzon, TURKIYE
چکیده
The main objective of this study is to investigate the behaviour of partially prestressed concrete (PPC) beams subjected to pure flexure. The test beams were produced by using both high performance concrete (HPC) and traditional concrete (TC). Test beams were compared with each other for strength, strain and cracking cases. The comparison was done by theoretical and experimental methods.Test measurements included failure loads, deflections, strains in concrete and steels, failure moments and service moments, experimental safety coefficients, number of cracks, crack widths, curvatures. Thus, optimum partially prestress ratio was determined for HPC and TC. Advantages of using high performance concrete in partially prestressed beams were brought out. According to the results of the study optimum partially prestress ratio for PPC beams produced by using traditional concrete is approximately %60. The ratio for PPC beams produced by using high performance concrete is approximately %70. The test results are shown that from many aspects to use high performance cocrete in PPC beams is more convenient than to use traditional concrete in PPC beams under some boundaries and conditionsکلیدواژه ها
beams, partially prestressed, high performance concrete, partially prestressed ratio.مقالات مرتبط جدید
- بررسی تاثیر استفاده از میراگرها بر پاسخ لرزهای سازه های فولادی با ارتفاع متغیر، تحت اثر زلزله های میدان دور و میداننزدیک
- تاثیر روش الکترواسمزی در تثبیت خاک های نرم اشباع به همراه کربنات کلسیم
- عملکرد سازه های بتنی در زلزله ۲۰۲۰ ازمیر ترکیه
- مطالعه تجربی تعیین مشخصات دینامیکی یک نمونه ساختمان بنایی با استفاده از آزمایش های ارتعاش اجباری و ارتعاش محیطی
- بررسی تاثیر ژیپس و ژئوفوم، بر ویژگیهای خاک رس اشباع
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.