Effect of Mold Material on Cooling Curves of Aluminum during Solidification
- سال انتشار: 1397
- محل انتشار: هفتمین کنفرانس بین المللی مهندسی مواد و متالورژی و دوازدهمین همایش ملی مشترک انجمن مهندسی متالورژی و مواد ایران و انجمن ریخته گری ایران
- کد COI اختصاصی: IMES12_303
- زبان مقاله: انگلیسی
- تعداد مشاهده: 487
نویسندگان
B.Sc. Student- School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
B.Sc. Student- School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
Associate Professor- School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
Associate Professor- School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
چکیده
The effect of cooling rate on the as-cast structure, cooling curve, and solidification time of aluminum was studied. For this purpose, metallic, green sand, and phenolic resin molds were considered. K-type thermocouple was inserted in the middle cross section of each mold and the continuous cooling curves from the pouring temperature were recorded using an accurate data acquisition system. It was revealed that by decreasing the cooling rate, the solidification time increases significantly and the columnar grains become coarser. Subsequently the Chvorinov Rule was used to rationalize the solidification behavior and it was revealed that the mold constant decreases with increasing cooling rate.کلیدواژه ها
Aluminum; Solidification; continuous cooling curves; Chvorinov Ruleمقالات مرتبط جدید
- مطالعه تجربی و مقایسه رفتار مکانیکی گلار۱/۲ و گلار ۲/۳ تحت بار خمشی
- Investigation effect of process parameters of Al۶۰۶۱ composites fabricated by FSP on microstructure, mechanical properties with minitab and designexpert
- بررسی خواص جوشمان های سطحی دو لایه بر روی ورق فولادی دو لایه
- مکانیزم ها در دیگ های بخار
- Numerical Study on the cavitation patterns in a Francis turbine
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.