Prediction of Temperature Distribution during Semi-Solid Forward Extrusion by Using Finite Volume Method

سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,584

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME07_092

تاریخ نمایه سازی: 6 آذر 1388

چکیده مقاله:

Today the development of innovative production technologies has became a major factor in global competition. One of these innovative production technologies in metal forming field is semi-solid forming (SSF). Especially for metals that are difficult to process with conventional technologies, semi-solid metal forming offers the possibility of significant gains in product quality and productivity of the forming process. In current study, one of the most conventional procedures between semi-solid forming processes, i.e. thixo forward extrusion, has been analyzed. In fact this process has been simulated by using the SupperForge software that is based on the finite volume method. As one of the purposed results of simulation, temperature distribution in whole workpiece at different steps of forming process has been studied. Based on simulated process results, temperature distribution can be influenced by different process parameters including on extrusion ratio, die angle and punch velocity.

نویسندگان

M.R Jafari

Master of sceience, Dept. Mechanical Engineering, Engineering Faculty, Ferdowsi University, Mashhad, Iran

S.M Zebarjad

Assistant Professor Dept. Materials Science & Engineering, EngineeringFaculty, Ferdowsi University, Mashhad, Iran

F Kolahan

Assistant Professor, Dept. Mechanical Engineering, Engineering Faculty, Ferdowsi University, Mashhad, Iran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • T. Brener, H.P. Mertens and G. Winning, "Thixoforging of aluminum ...
  • C.G Kang and J.H. Yoon, "A finite element analysis on ...
  • R. Kopp and N. Witulski, "Th ixoextrusion of aluminum wrought ...
  • W. Slagter, C. Florie and A Venis, "Advances in three ...
  • Manufacturing Research, 1999, pp73-78. ...
  • J.H. Yoon, Y.T. Im and N.S Kim, "Finite element modeling ...
  • A.A. Tseng and P. Kotrbacek, "Deformation behavior of steels in ...
  • M. Koc, V. Vazquez, T. Witulski and T. Altan, "Application ...
  • K. Watson and I. Demagor, Forming of aluminium alloy at ...
  • process modeling", Proceedings of the Manufacturing Research, 1999, pp73-78. ...
  • نمایش کامل مراجع