Feed Rate Optimization for 3-Axis Ball-End Milling of Sculptured Surfaces
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,437
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_049
تاریخ نمایه سازی: 6 آذر 1388
چکیده مقاله:
The aim of this research is to improve the productivity of CNC machine tools by optimizing feed rate. To optimize feed rate two programs were used, ”ACIS” (with scheme language) and ”VISUAL BASIC”. The scheme program for modeling the work piece, tool, cutting edge and calculating maximum cutting force and the VISUAL BASIC program to control all the activities, linked to the ACIS program for estimating optimized feed values. Laboratory tests were conducted To verify the results from the modeling, using an insert type one flute ball-end cutter on a CK45 carbon steel work piece. No coolant was used throughout the experimental works. Comparison were made between the maximum cutting forces, in the ”fix” feed rate tests. The results indicate significant increases in productivity which can be achieved, by using the optimized feed rate method
کلیدواژه ها:
نویسندگان
M.H Sadeghi
Associated professor of Mechanical Engineering Department, TMU University, Tehran, Iran
R Salami
Assistant Professor of Mechanical Engineering Department, Azad University Semnan branch, Semnan, Iran
H Haghighat
Assistant professor of Mechanical Engineering Department, Razi University, Kermanshah, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :