The effect of the Microstructure and Chemical Compositions on the Glass Dies life

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,620

فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME10_296

تاریخ نمایه سازی: 29 آبان 1388

چکیده مقاله:

Cast irons are commonly used as mold material in the production of glass materials. Since growth and scaling are the main failure mechanisms that limit the surface life of glass molds, the aim of the present study was to examine the growth and scaling behavior of cast irons by the addition of alloying elements. Glass mold cast irons must exhibit both heat resistance and oxidation resistance and this dual requirement can be met by A and spheroidal types graphite structures and small amount of Mo, Ni, Sn, Cr, Mn and Cu alloying. It is found that the gray cast irons consist of Mo٫ Mn and Cr alloying elements have high relative oxidation resistance about 4٪ with respect to Sn alloyed gray cast iron. The change of graphite morphology (lamellar to spheroidal shape) increased about 7٪ with respect to alloyed gray cast iron.

نویسندگان

M Babazadeh

Lecturer, Technical Higher Education Center of Tabriz, Tabriz, Iran

A Vajd

Lecturer, Technical Higher Education Center of Tabriz, Tabriz, Iran

M Abbasi

Assictant Professor,Islamic Azad University karj Branch, Karaj, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Butterworths, London. , ditionع 13. Smithells, C. J. 1979, Metals ...
  • o" ranian Conference on Manufacturing Engineering ICME 2010 ...
  • Robert, L., 1990, Metals Handbook, ASM, Tenth edition, Vol. 1. ...
  • Desy, A., 1959, AFS Transactions, Vol. 67, pp. 321. ...
  • Eliot, R., 1988, Cast Iron Technology, Butterworth and Co. (Publishers) ...
  • Kovacs, B. V., 1980, AFS Transactions, Vol. 88, pp. 79. ...
  • Hansen, M., 1958, Construction of Binary Alloys 2" dition, McGraw-Hil ...
  • Lalich, M. J., Loper, C. R., 1973, AFS Transactions, Vol. ...
  • Gange, M., 1964, AFS Transactions, Vol. 92, pp.387. ...
  • Petricenko, A. M., Salntev, L. H., 1972, Metallurgia, No. 3, ...
  • نمایش کامل مراجع