Effect of addetive materials on the foaming behavior, cell structure and mechanical properties of Al2O3-ZrO2

  • سال انتشار: 1388
  • محل انتشار: دهمین کنفرانس ملی مهندسی ساخت و تولید
  • کد COI اختصاصی: ICME10_113
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1674
دانلود فایل این مقاله

نویسندگان

H Sharifi

Ph.D.Student, Department of Materials and Metallurgical Engineering, Iran University of Science and Technology

M Divandari

Associate Professor, Department of Materials and Metallurgical Engineering, Iran University of Science and Technology

A Khavandi

Associate Professor, Department of Materials and Metallurgical Engineering, Iran University of Science and Technology

M. H. Idris

Associate Professor, Department of Material Engineering, Faculty of Mechanical Engineering,Universti Teknologi Malaysia (UTM),

چکیده

Polymeric sponge replication method is one of the routes that produce ceramic foams. Existence of central triangular voids in struts causes to decrease of mechanical properties and limit their applications. To remove this defect, some additives which consist of Al powder particles and silica sol were added to ceramic slurry which contains Al2O3 and ZrO2 (partially stabilized zirconia). With increasing temperature for pyrolyzing and sintering raw materials, at first, Al powder and glass phase were formed from Al2O3, ZrO2 and SiO2 was melted and was soaked into hollow struts.SEM investigations showed that center of foam struts was free of hollows.XRD considerations depicted there was ZrO2 phase with tetragonal crystallographic structure in the produced foam which could be caused to improve mechanical properties and toughness. Compressive strength of foams increased significantly because of decreasing closed porosity.Weibull statistical study showed remarkable increasing of Weibull module which this value for foams with 10, 20 and 30 ppi was 5.91, 6.06 and 6.53 respectively.

کلیدواژه ها

Ceramic foam – Strut structure - Al2O3-ZrO2 - Weibull modulus

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.