Balancing the forming forces in flow-forming process by finite element simulation

  • سال انتشار: 1388
  • محل انتشار: دهمین کنفرانس ملی مهندسی ساخت و تولید
  • کد COI اختصاصی: ICME10_080
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 2711
دانلود فایل این مقاله

نویسندگان

Hamed Asadi

M.S., Faculty of Mechanical Engineering, Isfahan University of Technology

چکیده

Flow-forming is a Kind of metal forming process in which the thickness of a tubular blank decreases and the length of it increases. Because of existing the thickness increasement phenomenon of the tubular blank after forming of the rollers, the forming forces which are applied from the rollers to the tubular blank become unequal; This unequalness of forming forces makes an unbalancing which results in exerting the resultant force to the bearings which are holding mandrel and tailstoke. For balancing the forming forces, we have to change depth of cut for each roller. In this article, the method of changing the depth of cut for each roller is explained. This method of balancing the forming forces is obtained by the auther. The flow-forming process is simulated by ABAQUS, the 3D elasto-plastic finite element software.

کلیدواژه ها

Flow-forming, Forming force, Balancing, Finite element simulation

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.