The Smoothing Simulation in the Electrochemical Machining Process (ECM)
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,085
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME08_085
تاریخ نمایه سازی: 27 آبان 1388
چکیده مقاله:
In this article, the electrochemical smoothing is considered. There is potential variance between the tool (cathode) and the workpiece (anode) in this process and the electrolyte flows in the distance between the anode and cathode gap. In contrary to the electrochemical machining, the electrochemical smoothing has no feed rate and is fixed. The simulation is performed and the changes of surface’ roughness and the current density are calculated time to time. This simulation saves time and charge of the machining. ECMSTD4, designed by MATLAB software, is applied to solving the equations and simulation of the electrochemical smoothing. ECMSTD is powerful software with high ability and low error that is programmed for this research.
کلیدواژه ها:
نویسندگان
A Mehrvar
Master Student of K.N.T University of Technology
M Ghoreishi
Assistant Prof. of K.N.T University of Technology
F Zamani
Bachelor of Engineering