High Speed Turning of H-13 Tool Steel using Ceramics and PCBN

  • سال انتشار: 1386
  • محل انتشار: دومین کنفرانس بین المللی و هشتمین کنفرانس ملی مهندسی ساخت و تولید
  • کد COI اختصاصی: ICME08_050
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1399
دانلود فایل این مقاله

نویسندگان

U Umer

Assistant Professor Engineering Sciences Department, Pakistan Navy Engg. College,National University of Sciences and Technology, Karachi, Pakistan

S.N .Danish

Assistant Professor, National University of Sciences and Technology (NUST), Pakistan

S.J Askari

Assistant Professor, National University of Sciences and Technology (NUST), Pakistan

S.I Butt

Assistant Professor, National University of Sciences and Technology (NUST), Pakistan

چکیده

H-13 is the toughest tool steel used in machined die casting and forging dies. Due to its extreme hardness and poor thermal conductivity high speed cutting results in high temperature and stresses. This gives rise to surface damage of the workpiece and accelerated tool wear. This study evaluates the performance of different tools including ceramics and PCBN using practical finite element simulations and high speed orthogonal cutting tests. The machinability of H-13 was evaluated by tool wear, surface roughness and cutting force measurements. From the 2D finite element model for orthogonal cutting, stresses and temperature distributions were predicted and compared for the different tool materials.

کلیدواژه ها

H-13, High speed turning, Finite element (FE)

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.