Numerical Study of A New Lattice Structure For Investment Casting Stereolithography Patterns
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,534
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME08_047
تاریخ نمایه سازی: 27 آبان 1388
چکیده مقاله:
In this research, the possibility of designing a new structure for investment casting SLA patterns is investigated via a numerical analysis. The couple thermal mechanical analysis has been done for both Quickcast 2.0 Offset Hexagon and new Offset Bridge-like Octagon by Ansys Workbench 11.0 finite element software. New structural units are suggested, while parameters such as the ceramic shell cracking, drainage characteristic, the void ratio or Rv for structures, and deviation of new structure during burnout stage are considered. The results of new octagon structure show that, there is a 62% reduction for hoop stresses on the ceramic shell, and void ratio improved from 90% to 93% for Quickcast 2.0 and new Offset Octagon structures respectively.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :