Identification and Safety Assessment of the Hazardous Zones (unwanted energy flows) in An Construction Project at the National Petrochemical Company by Application of ET&BA Method
- سال انتشار: 1388
- محل انتشار: سومین همایش ملی مهندسی ایمنی و مدیریت HSE
- کد COI اختصاصی: HSE03_022
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1936
نویسندگان
Ministry of Petroleum, Health, Safety and Environment General Office, Tehran, Iran
Department of Environmental and Occupational Health, Faculty of Medicine, Tarbiat Modarres University, Tehran
Kar Institute Higher Education, Qazvin, Iran
چکیده
In this study, the safety assessment has been conducted qualitatively with the goal of determining the potential existing hazards in construction sites, with the application of ET&BA technique and assessment of the identified risks. In other words, in order to determine the risk factor, the possibilities of conversion of potential hazards into accidents and the risk factor standards were classified qualitatively. For this purpose, the risk matrix presented in MIL-STD-882E standard (The 5th Version of U.S. Military Standard) was used. According to the results of this study, a total of 144 hazardous zones were identified. Based on the MIL-STD-882E Standard, 68% of the cases were in the high-risk zone, 30% were in the important risk zone and 2% were in the average risk zone. Meanwhile, working on scaffoldings has had the most number of high risks (23 cases) and the other sections including excavation, electrical, welding and Cutting operations are placed in the next level of importance with respectively 21, 13 and 11 high-risk cases. With due to the results, nearly the majority of identified points are in the high-risk zone (68%), and important zone (30%), which is unacceptable according to the MIL-STD-822E . Hence, the necessity of conducting appropriate controlling measures including the establishment of supervision and inspection systems, preventive repairing, and applying standard and safe techniques and methods are some of the proposals which leads to a drop in the possible risks. By comparing the results of this research with other similar projects, including the study which was conducted by the Ugandan Employment Office in 2005, one can realize similar results in developing countries, especially regarding high risks and control-related priorities.کلیدواژه ها
Construction, ET & BA, Risk Assessment and Accidentsمقالات مرتبط جدید
- بررسی به کارگیری سیستم ذخیره سازی انرژی با استفاده از منابع انرژی تجدیدپذیر
- اقدامات لازم برای حفاظت از محیط زیست دریایی
- ارائه طرح مبتنی بر رایانش ابری جهت ارتقاء بهره وری صنایع خودروسازی (مطالعه موردی: مدیران خودرو)
- مروری بر تکنولوژی ماکرویو برای خردایش سنگ های کمیاب
- کاربرد و بکارگیری تکنولوژی های اینترنت اشیا ، یادگیری ماشین و پردازش تصویر در امنیت و کنترل خودرو
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.