Creep and Recovery Behaviors of Hybrid Graphene/CNT/Epoxy Nanocomposites
- سال انتشار: 1395
- محل انتشار: پنجمین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT05_023
- زبان مقاله: انگلیسی
- تعداد مشاهده: 483
نویسندگان
PhD student, Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, ۱۶۸۴۶-۱۳۱۱۴, Iran
Professor, Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, ۱۶۸۴۶-۱۳۱۱۴, Iran
Professor, National Center for Nanoscience and Technology, China, Beijing ۱۰۰۱۹۰, P. R. China
Professor, School of Chemical Engineering, Shandong University of Technology, ۲۵۵۰۴۹ Zibo, Shandong, P. R. China
چکیده
In the present study, the improvement creep resistance and recovery behaviors of epoxy resin by adding graphene (G) and carbon nanotubes (CNTs) have been investigated. Four different hybrid nanocomposites, namely 0.1 wt.% G + 1 wt.% CNT / epoxy (Sample #1), 0.25 wt.% G + 1 wt.% CNT / epoxy (Sample #2), 0.5 wt.% G + 1 wt.% CNT / epoxy (Sample #3) and 0.5 wt.% G + 0.5 wt.% CNT / epoxy (Sample #4) were manufactured and tested. Nano fillers were dispersed into the resin by an ultrasonic apparatus. For each nano fillers with different weight fraction, the optimum sonication time was found. Tensile creep tests were carried out at 85 oC using a DMA apparatus for an hour and after that the constant load was removed and the strain recovery of samples was measured. Experimental observations on sample #4 showed the best improvement on creep resistance (64%) and recovery (71%) behaviors more than the other samples. Finally, using the Burger and Weibull models were used to fit the test data to predict the long-term creep and recovery strains.کلیدواژه ها
Hybrid nanocomposites, Creep resistance, Recovery, DMAمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al/Cu/Ti/Cu/Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.