The Effect of Nano Modified Sizing Material on the Flexural Properties of Glass/Epoxy Laminated Composites
- سال انتشار: 1395
- محل انتشار: پنجمین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT05_021
- زبان مقاله: انگلیسی
- تعداد مشاهده: 387
نویسندگان
Professor,Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics,School of Mechanical Engineering, Iran University of Science and Technology,Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran
m.sc.student Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, ۱۶۸۴۶-۱۳۱۱۴, Iran
Ph.D. Student Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics,School of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran
چکیده
In this study, an experimental investigation is performed to the effect of nano modified sizing material on the mechanical properties including flexural stiffness and strength of laminated composites. For this purpose, two types of nano particles including functionalized carbon nano tube (fCNT) and carbon nano fiber (CNF) are dispersed in thesizing materials of the glass fibers. Afterwards, the three-point bending (3-PB) specimens using the glass fiber/epoxy with nano modified sizing and without sizing are manufactured by deep coating hand layup methods and tested based on the ASTM standard. The experimental results show that specimens without sizing have the lowest strength due to the lack of coupling agent. In addition, the nano reinforced sizing has less effect on the flexural modulus of 3-PB specimens.کلیدواژه ها
glass fiber sizing, nano modified sizing, interface/interphase, flexural strength/stiffnessمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al / Cu / Ti / Cu / Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.