Elastic Behavior of Self-Healing Composites using a Micromechanical Model
- سال انتشار: 1395
- محل انتشار: پنجمین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT05_020
- زبان مقاله: انگلیسی
- تعداد مشاهده: 424
نویسندگان
Professor,Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics,School of Mechanical Engineering, Iran University of Science and Technology,Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran
Ph.D. Student Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics,School of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran
چکیده
In the present research, effects of thermal healing on the elastic behavior of self-healing composites have been investigated via a micromechanical model. Using a combined Mori-Tanaka method and classical lamination theory, composites were analyzed and the results compared with existing experimental results. The homogenization of fibersand matrix of cross-ply laminates was performed to create a single material with effective properties for the transverse and longitudinal directions of each ply. The transverse cracks are assumed as ellipsoidal inclusions with zero elastic properties. Then, the effective elastic stiffness of the damaged transverse plies was estimated as a function of the crack density. The crack healing was finally considered as a linear function of the temperature. The effective properties of the transverse and longitudinal plies were homogenized to construct the effective properties of the cross-ply laminate. The results of the model show a good agreement with the available experimental dataکلیدواژه ها
Elastic stiffness, Mori-Tanaka method, Self-healing composites, Thermal crack healingمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al/Cu/Ti/Cu/Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.