A Novel Analytical Model to Estimate Mode I Strain Energy Release Rate of an Adhesive-Interlayered DCB Specimen

سال انتشار: 1395
محل انتشار: پنجمین کنفرانس بین المللی کامپوزیت
کد COI اختصاصی: COMPOSIT05_019
زبان مقاله: انگلیسی
تعداد مشاهده: 497

نویسندگان

Professor Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University ofScience and Technology, Tehran, ۱۶۸۴۶-۱۳۱۱۴, Iran

a ebrahimi

m.sc.student Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University ofScience and Technology, Tehran, ۱۶۸۴۶-۱۳۱۱۴, Iran

a zeinedini

ph.d.student ,Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University ofScience and Technology, Tehran, ۱۶۸۴۶-۱۳۱۱۴, Iran

چکیده

The aim of this study is to develop an analytical method to analyze the mode I strain energy release rate (SERR) of an adhesive material embedded in the middle plane of double cantilever beam (DCB) laminated composites. An energy-based criterion was used in order to develop the model. The cracked and un-cracked regions of a DCBspecimen have been modeled independently. The cracked region was modeled in form of a cantilever Timoshenko beam with a specified angle. On the other hand, the un-cracked region, including the adhesive layer and one of the sublaminates, was modeled in form of two Euler- Bernoulli beams. As the main innovation of this paper, the adhesive layer was considered as an elastic beam bonded to the upper sub-laminate with an elastic foundation. At the end of the modeling stages, using the principle of superposition, the displacement due to applying the force on the tip of the crack and the mode I SERR were calculated. Finally, the present model was validated by the experimental data available in the literature for laminated composites. The results showed there is a good agreement between the analytical and experimental methods

کلیدواژه ها

adhesive layer, analytical model, strain energy release rate, laminated composites, mode I

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.