Fabrication and bending characterization of Cu-Fe FGM produced by powder metallurgy method
- سال انتشار: 1395
- محل انتشار: پنجمین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT05_015
- زبان مقاله: انگلیسی
- تعداد مشاهده: 564
نویسندگان
Professor, Department of Mechanical Engineering, K.N. Toosi University of technology, Tehran,۱۹۹۹۱۴۳۳۴۴, Iran
M.S.C. Student, Department of Mechanical Engineering, K.N. Toosi University of technology, Tehran,۱۹۹۹۱۴۳۳۴۴, Iran
Ph.D. Student, Department of Mechanical Engineering, K.N. Toosi University of technology, Tehran,۱۹۹۹۱۴۳۳۴۴, Iran
چکیده
Functionally graded materials (FGMs) are a new type of composites with non-homogenous microstructure and variable mechanical properties. The physical and mechanicalproperties of FGMs vary in the thickness direction continuously. In this research, powder metallurgy method has been used to fabricate functionally graded Copper-Iron specimens with more than 97% relative density in 5 layers. First, the metal powder layers are pressed under cold iso-static pressure (CIP) at 400 MPa. Then the brittle pressed specimens are sintered with a defined cycle at 1000oC in a proper vacuum furnace. The composition of layers is changed by a linear function from the Cu rich face to the Fe rich one. The micrographs have been investigated to observe the microstructure of FGM, morphology and composition between the layers. Three-point bending tests were conducted in order to obtain the mechanical properties of the fabricated FGM specimens. The resulting functionally graded Cu-Fe shows improved mechanical properties incomparison with pure iron and copper.کلیدواژه ها
Functionally graded material, powder metallurgy, microstructure, density of FGM, bending strengthمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al/Cu/Ti/Cu/Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.