Optimization of laminate stacking sequence for maximum buckling load of Mindlin plates
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 517
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
SECM02_291
تاریخ نمایه سازی: 30 شهریور 1397
چکیده مقاله:
The main objective of the study is to use genetic algorithm for the buckling optimization rotationally restrained laminated plates. Mindlin plate theory considering the first-order shear deformation effect, is used to extract characteristic equations of the plate under in-plane load. The buckling problem of laminated plate is analyzed by Rayleigh–Ritz method. Using Genetic Algorithm method, the aim of the optimization is to maximize the buckling load capacity and the design variable is the ply orientation. For validation of the formulas, the numerical results that obtained by MATLAB programing have been compared with the Abaqus software results. The results showed a good correlation between the outputs.
کلیدواژه ها:
Stacking sequence optimization ، Mindlin plate theory ، uniaxial and biaxial buckling load ، Genetic Algorithm
نویسندگان
Sina Farahani
PhD Candidate, Department of Civil Engineering, Razi University, Kermanshah, Iran
Amir H. Akhaveissy
Associate Professor, Department of Civil Engineering, Razi University, Kermanshah, Iran
Mojtaba Fathi
Assistant Professor, Department of Civil Engineering, Razi University, Kermanshah, Iran