Assessment of High Strength Concrete Using the Ultrasonic Pulse Velocity

سال انتشار: 1388
محل انتشار: نخستین کنفرانس بین المللی بتن
کد COI اختصاصی: ICCT01_092
زبان مقاله: انگلیسی
تعداد مشاهده: 1786

نویسندگان

Al-Fetah University, Faculty of Engineering / ۷th of October University, Faculty of Engineering

چکیده

The ultrasonic pulse velocity (UPV) of range of high strength concrete (HSC) ranging from 50-120 N/mm2 was measured to assess concrete quality. Crushed limestone and gravel aggregates of 10mm single size and sintered fly ash of high porosity were used. A 100mm cubes and Prisms (275 x 76 x 76 mm), were used as test specimen after they were initially water cured or air dried for 7 days then oven dried at 105°C or at 50°C then 105°C. The influence of mix composition, curing regime, drying temperature, incorporation of 10% condensed silica fume (csf), and effect of cracking resulting from the applied loads were investigated. The cubes were subjected to different levels of compressive stress/strength ratio loading (0.3, 0.6, 0.9) for 4 times, while the concrete prisms were subjected to different levels of torsional stress/strength ratio loading (0.6, 0.9) for 4 times, then used to measure the ultrasonic pulse velocity. The ultrasonic pulse velocity was found to give a good indication of the concrete quality and reflected the changes which occurred in the concrete microstructure due to the change in mix composition, curing regime, moisture content or damage. The ultrasonic pulse velocity was found to correlate with the concrete compressive strength and torsional strength values.

کلیدواژه ها

(HSC, UPV, Damage)

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.