Steel Fibre High Strength Concrete Containing Industrial By-Products as Mineral Additives

  • سال انتشار: 1388
  • محل انتشار: نخستین کنفرانس بین المللی بتن
  • کد COI اختصاصی: ICCT01_033
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1394
دانلود فایل این مقاله

نویسندگان

M Chemrouk

Professor University of Sciences & Technologies Houari Boumediene (USTHB), Algiers, Algeria

B Boulekbeche

Doctorate; University of Sciences & Technologies Houari Boumediene Algiers, Algeria.

M Boulmelh

Doctorate; University of Sciences & Technologies Houari Boumediene Algiers, Algeria.

چکیده

This paper presents the results of an experimental study concerning the effect of fibres’ reinforcement on high strength concrete containing industrial by-products as mineral additives. Indeed, fibres of different natures have been used in construction materials since the old time,depending on the targeted objectives. In concrete in general, and in high strength concrete in particular, the aim is to improve the ductility and restrain cracking and, to a lesser extent, improve the mechanical properties of the material such as the tensile strength and modulus of rupture. Such improved behaviour is particularly required in seismically active regions to prevent catastrophic brittle failures such as those which occurred in the Boumerdes-Algiers earthquake in 2003. For this targeted objectives, steel fibres are the relevant ones. The extent of the improvement of the ductility and the tension behaviour of high strength concrete material are, however, dependant on a number of parameters related to the fibres. The use of slags as mineral additives was found to facilitate the movement of steel fibres inside the fresh concrete and hence improve their orientation for a better efficiency after hardening of the concrete material.

کلیدواژه ها

High Strength Concrete, Fibre Concrete, Ductility, Cracking, Tensile Strength, Modulus of Rupture, Brittleness

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.