Kinematic runoff and erosion model efficiency assessment for hydrological simulation of semi-arid watersheds
- سال انتشار: 1397
- محل انتشار: فصلنامه جهانی علوم و مدیریت محیط زیست، دوره: 4، شماره: 2
- کد COI اختصاصی: JR_GJESM-4-2_002
- زبان مقاله: انگلیسی
- تعداد مشاهده: 478
نویسندگان
Department of Watershed Management, Faculty of Natural Resources and Environment, University of Birjand, Birjand, Iran
Department of Watershed Management, Faculty of Natural Resources and Environment, University of Birjand, Birjand, Iran
Department of Watershed Management, Faculty of Natural Resources and Environment, University of Birjand, Birjand, Iran
Department of Water Engineering, Faculty of Civil Engineering, University of Tabriz, Tabriz, Iran
چکیده
Hydrologic modeling of semi-arid watersheds is imperative for the development ofappropriate water and soil conservation plans. In the current study, the efficiency of Kinematic Runoff andErosion model-version 2 (K2) model was used to evaluate water discharge and sediment load simulationof Bar watershed, located in the north-eastern part of Iran. The K2 model relies on the kinematic waveapproach to route surface flow. The drainage network and planes are discretized to represent the watershed.In order to evaluate the model, 3 and 2 reported rainfall incidents in various dates were selected for K2calibration and validation, respectively. The multiplier approach was employed for model calibration. Theresults of sensitivity investigation revealed that the soil parameters Ks-CH, n and G had the highest impacton flow discharge. Through the calibration process, the Nash-Sutcliff Efficiency and the coefficient ofdetermination as fitting metrics for water discharge simulation (based on event #2, dated 16 March 1992)were estimated to be 0.78 and 0.88, respectively. According to the aggregated measure, the highest K2efficiency was obtained during the calibration process based on event #2. Other storm events were resultedin a good simulation, as well. During the validation process, K2 simulation (based on event #4, dated 07March 1991) led to the Nash-Sutcliffe Efficiency and R2 of 0.77 and 0.71, respectively. The K2 calibrationfor sediment load simulation was performed through the alterations of the Pave and Rainsplash parameters.The bias percentages between simulated and observed total sediment loads based on events #2 and #4 were5% and 16%, respectively. Conclusively, the K2 model showed an acceptable robustness in the hydrologicalsimulation of Bar watershed as a representative semi-arid watershed in northeast of Iran.کلیدواژه ها
Calibration; Hydrologic simulation; Kinematic runoff and erosion model (Kineros2); Runoff yield; Sediment load; Sensitivity analysis; Validationمقالات مرتبط جدید
- استفاده از مواد سازگار با محیط زیست در صنعت ساختمان بتن سبز و بازیافتی رویکردی موثر در توسعه پایدار
- بررسی جایگاه مناطق حفاظت شده ایران و نقش مشارکت های مردمی در حفاظت از مناطق
- مروری بر مقایسه اثر سمیت نانوذرات فلزی مختلف، روی آبشش ماهی ها
- مطالعه مدیریت ازن و عوامل آلودگی محیط زیست
- پارامترهای محیط زیستی یا فعالیت های انسانی کدام یک بیشترین تاثیر را بر غلظت متان اتمسفری ایران دارند؟
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.