Synthesis and study of properties and application of hydrophobic hybrid aerogel based on polymeric sorbent

  • سال انتشار: 1396
  • محل انتشار: پنجمین کنفرانس بین المللی نوآوری های اخیر در شیمی و مهندسی شیمی
  • کد COI اختصاصی: CHCONF05_264
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 462
دانلود فایل این مقاله

نویسندگان

MohammadMehdi Seraji

ACECR, Production Technology Research Institute, Chemical Engineering Department, Ahwaz, Iran

Sadra Soleimankhani

ACECR, Production Technology Research Institute, Chemical Engineering Department, Ahwaz, Iran

Jamal Davarpanah

ACECR, Production Technology Research Institute, Chemical Engineering Department, Ahwaz, Iran

چکیده

Polymeric sorbent with hydrophobic property was prepared via sol-gel synthesis. The sol-gel process is based on the evolution of inorganic networks through the formation of liquid colloidal suspension (sol) and gelation of the sol to form a network in a continuous solid phase (gel). The sols based on silica were prepared by Tetraethylorthosilicate (TEOS) and Methyltriethoxysilane (MTES) as primary precursors. To achieve suitable physical properties such as high porosity and small pore size, formaldehyde-phenol resin was used as polymeric phase. The results of FESEM and nitrogen adsorption indicated that the structure of this polymeric sorbent is uniform, highly porous, and colloid like network. Also this polymeric sorbent was hydrophobic due to the formation of CH3 groups on the pore walls and the value of the contact angle obtained was about 147˚. The hydrophobic polymeric sorbent was used for removal of phenol from water. The study was carried out as functions of pH, contact time and initial phenol concentration. The experiments showed that maximum phenol removal under optimum conditions, was obtained at neutral pH without buffered condition and it takes 40 min to attain equilibrium. Langmuir, Freundlich and Temkin isotherm models were applied to fit adsorption equilibrium data. The best-fitted data was obtained with the Langmuir model and the adsorbent capacity was 97.09 mg g−1. Kinetic studies indicated that the adsorption process was described better by pseudo-secondorder model.

کلیدواژه ها

synthesis, removal, silica-based aerogel, polymeric sorbent, equilibrium isotherm, phenol

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.