Two-Dimensional CFD Modeling and Simulation of Sodium and Chloride Migration in Clay
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 272
فایل این مقاله در 21 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CHCONF05_176
تاریخ نمایه سازی: 2 تیر 1397
چکیده مقاله:
Landfills are a major source of soil pollution due to leachates of municipal wastes and migration of contaminants through the soil. Clay barriers are a common method for controlling leachates in the landfills. In order to design efficient clay barriers, an understanding is required for the behavior of contaminants during migration through clay barriers. In this study, a column test is modeled with the use of CFD method. The simulation results were in good agreement with experimental data. This model provided data about important parameters which affect the component migration through clay. This model proved that distribution coefficient in the seepage velocities which is less than 0.035 m/a is negligible in comparison with diffusion coefficient. The increase in bed height leads to increase in adsorber saturation point. The results also indicated that, the increase in porosity decreases contaminants concentration in the column output and the increase in the anion concentration in the sours solution increases mass transfer. At the end, it was found that inlet velocity has no effect on concentration distribution through the column.
کلیدواژه ها:
نویسندگان
Hamed Farhangian
Faculty of Chemical Engineering, Gas and Petroleum, Shiraz University, Shiraz, IRAN
Hadis Kordi
Faculty of Chemical Engineering, Gas and Petroleum, Semnan University, Semnan, IRAN