Numerical Analysis of Effects of Gurney Flaps ConsideringDeflected Configurations
- سال انتشار: 1388
- محل انتشار: دوازدهمین کنفرانس دینامیک شاره ها
- کد COI اختصاصی: CFD12_080
- زبان مقاله: انگلیسی
- تعداد مشاهده: 2036
نویسندگان
Assistant Professor Department of Mechanical Engineering Iran University of Science and Technology
Graduate Student Department of Mechanical Engineering Iran University of Science and Technology
چکیده
The aerodynamic forces and flow structures of two airfoils (NACA 0012-NACA 0015) with several configurations and Gurney flaps, a tab of small length (1–4% of the airfoil chord) that protrudes perpendicular to the chord at the trailing edge, at different Reynolds numbers, considering different turbulence models, are investigated by numerically solving the Navier-Stokes equations. Both two-dimensional and three-dimensional studies have been conducted, by utilization of quadratic meshes, low computation time has been achieved. Both 2D and 3D computations agree with experimental data in lift and drag coefficient and shows that the addition of a Gurney flap increases the maximum lift coefficient, however there was a drag increment at low-to-moderate lift coefficient. In addition, the boundary layer profile measurements were taken. In case of NACA 0012, the effective Gurney flap height is about 2% of chord length, which provides the highest lift-to-drag ratio among the investigated configurations when compared with the clean NACA 0012 airfoil. In this case, the device remains within the boundary layer. For lift increment with very little penalty in drag, deflected Gurney flaps are investigated numerically. Results make deflected Gurney flaps more feasible in case of load limitations such as applications to wind turbine, racing-car spoilers and UAV's.کلیدواژه ها
Numerical analysis, Deflected Gurney Flaps, Aerodynamic Coefficientsمقالات مرتبط جدید
- بررسی اثرات انتشار امواج لرزه ای در سازههای قاب خمشی دسته شده و هگزاگرید دارای پارامتر سختی یکسان
- شناسایی آزمایشگاهی ترک طولی تراورس بتنی پیش تنیده با استفاده از تست مودال تجربی
- Investigation of Transmission Loss and Absorptioncoefficient of the PU Composite Panels forConstruction Application
- Comprehensive Analysis of the Effect of Polyisobutyl-ene (PIB) Molecular Weight on Damping Properties of Butyl-Based Constrained Layer Damping Systems
- REVIEWING THE OBERST BEAM METHOD AND ITS AP-PLICATION IN CONSTRAINED LAYER DAMPING FOR AUTOMOTIVE NOISE, VIBRATION, AND HARSHNESS (NVH) CONTROL
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.