Predictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models

سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 306

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

این مقاله در بخشهای موضوعی زیر دسته بندی شده است:

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJE-31-1_005

تاریخ نمایه سازی: 1 اردیبهشت 1397

چکیده مقاله:

Over the past few decades machining of hardened components has become a reality by means of hard turning. The cheaper coated carbide tool is seen as a substitute for cubic boron nitride (CBN) inserts in the hard turning; however, the tool flank wear is an unavoidable phenomenon when using coated carbide tools during hard turning. In this investigation, the cutting tool wear estimation in coated carbide tools using regression analysis, fuzzy logic and Artificial Neural Network (A–NN) is proposed. Work piece taken into consideration is AISI4140 steel (47 HRC). Experimentation is based on response surface methodology (RSM) as per design of experiments. The cutting speed (V), feed (f) and depth of cut (d) are taken as the inputs and the tool flank wear is the output. Results reveal that ANN provides better accuracy when compared to regression analysis and Fuzzy logic

نویسندگان

D Rajeev

Research Scholar, Mechanical Engineering, Hindustan University, Chennai, India

D Dinakaran

Department of Mechanical Engineering, Hindustan University, Chennai, India

N Kanthavelkumaran

Department of Mechanical Engineering, Arunachala College of Engineering for Women, Manavilai, Kanyakumari, Tamilnadu, India

N Austin

Department of Mechanical Engineering, Mar Ephraem College of Engineering and Technology, Elavuvilai, Tamilnadu, India