Thermal Performance of Jet Impingement with Spent Flow Management
عنوان مقاله: Thermal Performance of Jet Impingement with Spent Flow Management
شناسه ملی مقاله: JR_IJE-30-10_021
منتشر شده در شماره 10 دوره 30 فصل October در سال 1396
شناسه ملی مقاله: JR_IJE-30-10_021
منتشر شده در شماره 10 دوره 30 فصل October در سال 1396
مشخصات نویسندگان مقاله:
a Husain - Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman
m Ariz - Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman
خلاصه مقاله:
a Husain - Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman
m Ariz - Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman
The present study proposes novel micro-jet impingement heat sink with effusion holes for flow extraction. The design consists of impingement nozzles surrounded by multiple effusion holes to take away the spent fluid. A three-dimensional numerical model is used for steady, incompressible, laminar flow and conjugate heat transfer for the performance analysis of the proposed design. The computational domain is defined by applying symmetric boundary conditions around a unit cell of the jet impingements and effusion holes. The effect of several design parameters, viz., jet diameter, effusion-hole diameter, stand-off and the jet-to-effusion pitch is investigated. A higher standoff-to-jet diameter ratio exhibited lower thermal resistance whereas lower standoff-to-jet diameter ratio exhibited lower pressure-drop. Smaller jet-to-effusion hole spacing resulted in minimum temperature-rise along with maximum total pressure-drop and heat transfer coefficients
کلمات کلیدی: Jet Impingement,Effusion Holes,Spent Flow Management,Enhance Heat Transfer,Thermal Resistance,Pressure Drop,
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/719502/