Producing different sizes of talc nanoparticles and its effect on quartz flotationits
محل انتشار: چهاردهمین کنفرانس مهندسی ساخت و تولید ایران
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 389
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME14_119
تاریخ نمایه سازی: 29 فروردین 1397
چکیده مقاله:
Natural hydrophobic talc was selected to produce different size of nanoparticles as a flotation collector. The aim of this work was to understand the effect of talc nanoparticles size on the quartz flotation recovery. Planetary mill in several conditions was used to control the size reduc-tion of talc, less than 500, 400 and 300 nm. Zeta potential technic dictated pH 1.5 is the best condition for nano-talc powders and quartz to be physically attached on the quartz particles sur-faces. Talc particles were adsorbed onto the hydrophilic quartz particles to encourage the airbubble attachment, and improved the quartz flotation recovery. It was found that as the talc parti-cle size decreased, the amount of talc dosage and quartz flotation recovery increased
کلیدواژه ها:
نویسندگان
a hajati
School of mining engineering, College of Engineering, University of Tehran, Tehran ۱۴۳۹۹۵۷۱۳۱, Iran,Mining Engineering Department, Arak University of Technology, Arak, Markazi Province, ۳۸۱۸۱۴۱۱۶۷, Iran,
s.z shafaei
School of mining engineering, College of Engineering, University of Tehran, Tehran ۱۴۳۹۹۵۷۱۳۱, Iran,
m noaparast
School of mining engineering, College of Engineering, University of Tehran, Tehran ۱۴۳۹۹۵۷۱۳۱, Iran,
s farrokhpay
Université de Lorraine, GeoRessources Laboratory, UMR ۷۳۵۹ CNRS-Cregu, ۲ rue du Doyen Marcel Roubault, TSA ۷۰۶۰۵, F۵۴۵۱۸, Vandoeuvre-lès-Nancy, France.