Synthesis and characterization of nickel zinc spinel ferrite synthesized by inverse co-precipitation method
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 461
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES11_436
تاریخ نمایه سازی: 7 اسفند 1396
چکیده مقاله:
Nickel zinc ferrite (NZFO) nanoparticles were synthesized by an inverse chemical co-precipitation method. Effects of synthesis conditions on the mean crystallite size, phase composition and morphology were investigated by X-ray diffraction analysis (XRD), scanning electron microscope (SEM) and vibrating sample magnetometer (VSM), respectively. XRD diffraction pattern exhibited representative diffraction peaks corresponding to as-dried powder and heat-treated powders. Regardless of heat-treatment, NZFO formed completely. SEM analysis studied morphology of nanoparticles with particle size of about 10 to 110 nm depended on the heat-treatment temperature. Results of VSM reveal the magnetic properties of produced compound in various heat-treatment temperature. It was shown that increasing the heat-treatment temperature from 100℃ to 1000℃ caused increasing of saturation magnetization (
کلیدواژه ها:
نویسندگان
Amin Ahangari Asl
MSc student of Material Engineering, University of Tehran School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
Shahram Raygan
Associate Professor of Material Science and Engineering, University of Tehran School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
Abolghasem Ataie
Professor of Material Science and Engineering, University of Tehran School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran