Failure Prediction of DP600 Steel during Cross-Die Test
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 355
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES11_421
تاریخ نمایه سازی: 7 اسفند 1396
چکیده مقاله:
Dual-phase (DP) steels offer an improved combination of strength and ductility. Therefore, these steel grades are extensively used in the car body manufacturing process. In the current work, the Gurson–Tvergaard–Needleman (GTN) model is utilised to predict the failure behaviour of DP600 steel during the cross-die test, which has been used extensively in the automotive industry to assess the formability of sheet metals. GTN model parameters were identified through the response surface methodology (RSM), and were verified by the comparison of predicted and experimental forming limit curves (FLCs). The good agreement between the simulation and experimental results concerning failure behaviour during the cross-die test indicates that the GTN model can be applied to predict the forming characteristics of DP600 steel. It was also concluded that RSM is a proper method of predicting GTN model parameters.
کلیدواژه ها:
نویسندگان
A. Ramazani
Department of Eerospace Engineering, University of Michigan, ۲۳۰۰ Harward, USA.
M. Abbasi
Faculty of Engineering, University of Kashan, Ravandi Blvd, Kashan, Iran.
B Bagheri
Department of Mining and Metallurgy, Amirkabir University of Technology, Tehran, Iran. Corresponding author: Behrouz Bagheri