Ultrasound-assisted adsorption of Auramine-O dye on to the copper-doped zinc sulfide nanoparticles loaded on activated carbon: Optimization by artificial neural network and genetic algorithm
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 377
فایل این مقاله در 17 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES11_348
تاریخ نمایه سازی: 7 اسفند 1396
چکیده مقاله:
In this paper, artificial neural network (ANN) and genetic algorithm (GA) were applied to observe the optimal practical conditions, i.e., adsorbent dosage, sonication time, MB concentration, Auramine-O (AO) concentrations, Er concentration as input parameters and % removal AO as output parameters. To enhance the adsorption of AO dye from ternary aqueous solutions containing AO, Erythrosine (Er) and Methylene Blue (MB) were rapidly performed onto the copper-doped zinc sulfide nanoparticles loaded on activated carbon (ZnS:Cu-NP-AC). After examination the different ANN architectures an optimal structure of the model, i.e. 5-12-1 is obtained with the mean absolute error 1.5% and R2 = 0.9994. The suggested structure was used as fitting function for genetic algorithm. Comparison of the predicted values with the experimental data showed that the GA–ANN model is a powerful method to find the optimal conditions for preparing of copper-doped zinc sulfide nanoparticles loaded on activated carbon with the highest adsorption of AO dye. Moreover, sensitivity analysis revealed that AO concentration and Er concentration and MB concentration have the higher and lower effect on % removal AO, respectively.
کلیدواژه ها:
Auramine-O dye ، copper-doped zinc sulfide nanoparticle ، activated carbon ، Genetic Algorithm ، Artificial Neural Network ، sensitivity analysis
نویسندگان
Delaram Alaee
Master of science nanotechnology , Department of material engineering, Shahid Bahonar University of Kerman, Kerman, Iran.
Gholam Reza Khayati
Assistant Professor, Faculty of Shahid Bahonar University of Kerman, Department of Materials Engineering, Kerman, Iran,