Development a new model based on artificial neural network to estimate torque of a conventional CI engine
محل انتشار: دومین کنفرانس ملی محاسبات نرم
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 406
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CSCG02_067
تاریخ نمایه سازی: 7 اسفند 1396
چکیده مقاله:
Torque estimation needs intensive efforts and costly sensors. In this research, a model was proposed to estimate ITM285 tractor engine torque using some low cost sensors. Radial basis function (RBF) neural network was used for torque estimation, based on the data obtained from some inexpensive sensors including engine speed, exhaust gas opacity, fuel mass flow and exhaust gas temperature. Thirteen training algorithms were examined to train the RBF. These algorithms were compared using two statistical methods namely k-fold cross validation and completely randomized design (CRD). The Bayesian regularization (Trainbr) algorithm was the best one in regard of engine torque estimation. Based on the sensitivity analysis of the RBF, only using engine speed, fuel mass flow and exhaust gas temperature sensors are sufficient for proper engine torque estimation. R2, RMSE and EF of the RBF were 0.99, 0.50 and 0.99, respectively. It is concluded that the RBF model can be a suitable technique for estimating engine torque.
کلیدواژه ها:
نویسندگان
Majid Rajabi Vandechali
PhD student, Department of Biosystems Engineering, Faculty of Agriculture, Ferdowsi University of Mashhad, Mashhad, Iran.
Mohammad Hossein Abbaspour-Fard
Professor, Department of Biosystems Engineering, Faculty of Agriculture, Ferdowsi University of Mashhad,Mashhad, Iran.
Abbas Rohani
Assistant Professor, Department of Biosystems Engineering, Faculty of Agriculture, Ferdowsi University of Mashhad, Mashhad, Iran.