Inrush Current Identification in Power Transformers Using Weight Functions
محل انتشار: دوازهمین کنفرانس دانشجویی مهندسی برق ایران
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,045
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISCEE12_356
تاریخ نمایه سازی: 29 اسفند 1387
چکیده مقاله:
Identification of inrush current from other existing faults is an important issue in protection of the power transformers. In order to analyze the inrush current and the single phase to ground fault current from the harmonic point of view, it is necessary that a proper method is presented for identifying these two currents. The proposed method is based on the weight functions of the calculated vectors by the positive sequence harmonic components of the inrush and the single phase o ground fault current. Regarding the variation range of the weight functions in this study, the usefulness of the proposed method is illustrated
کلیدواژه ها:
نویسندگان
S Jalilzadeh
Electrical Engineering Department, Zanjan University, Zanjan, Iran
M Jabbari
Electrical Engineering Department, Zanjan University, Zanjan, Iran
A Kimiyaghalam
Electrical Engineering Department, Zanjan University, Zanjan, Iran
M Mahdavi
Electrical and Computer Engineering Department, University of Tehran, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :