Closed-cell aluminum foam manufactured by accumulativeroll-bonding and friction stir processing
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 481
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC04_034
تاریخ نمایه سازی: 22 دی 1396
چکیده مقاله:
Two manufacturing routes of accumulative roll-bonding (ARB) and combination of friction stir processing (FSP) and ARB was compared to production of closed-cell aluminum foams. Titanium hydride powder as foaming agent was distributed inside 1100 aluminum sheets through ARB and then FSP trials were conducted. Optical microscopy and densitometry measurements, revealed different agglomeration level and distribution of titanium hydride particles in two manufacturing routes before heat treatment. As a result, different porosity was obtained in two methods after gas releasing. Moreover, it was found that FSP modified the distribution of titanium hydride powder and therefore resulted in an improved foam structure
کلیدواژه ها:
نویسندگان
J. M. Milani
Faculty of Materials Engineering, Sahand University of Technology, Tabriz, Iran.
T Saeid
Faculty of Materials Engineering, Sahand University of Technology, Tabriz, Iran.