mahnaz firuzi - Department of Geology, Bu-Ali Sina University, Hamadan, IRAN
ali noorzad - Faculty of Civil, Water and Environmental Engineering, Shahid Beheshti University, Tehran, IRAN
mohammad hossein ghobadi - Department of Geology, Bu-Ali Sina University, Hamadan, IRAN

Seildrud dam is one of the four largest dams of Gilan Province, Iran. The height and crest length of the dam are 106-and 425 m, respectively. In the right abutment, the intersection of bedding plane with fou.r joint sets has initiated wedge and toppling failures and falling blocks with the potential southwest trends. In the present research, rockfall modeling (at four seeders) was performed to assess the hazards related to these falling blocks. The obtained results indicate that the maximum run-out distance for seeders 3 and 4 are 230.1 and 230.7 m, respectively. These values present that dam is not affected by the coverage distance and block amplitude. In comparison, for seeders 1 and 2 all blocks pass over the Qazvin-Rasht freeway and fall down into the dam. The maximmn boimce height, maximum velocity, and maximmn kinetic energy at seeder 2 are 12 m, 13.7 m/s, and 15,000 kJ, respectively. Therefore, rockfall occurrence may pose some safety risks to the cars in the freeway and also the dam itself As some remedies to deal with this situation, it is suggested removing loose blocks and installing rockfall-retaining structures such as protection barrier at the elevation 245 m.

Sefidrud Dam, Joints, RocFall Modeling, Coverage Distance, Barrier