Numerical simulation of temperature distribution in welding and theeffect of welding sequence on heat distribution and distortion
محل انتشار: دومین کنفرانس بین المللی مهندسی مکانیک و هوافضا
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 665
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MECHAERO02_379
تاریخ نمایه سازی: 13 شهریور 1396
چکیده مقاله:
In this study the heat distribution of a T-shape steel plate due to gas metal arc welding (GAMW ) has simulated numerically with the aid of finite element method. 3D thermal simulation was done via ANSYS software. To apply the heat source during welding , a Macro code based on Goldak’s Model were programmed.The simulation was in 3D phase, transient and non-linear. Birth and dead technique was used to add filler metal. because of the high thermal gradients, temperature dependent properties were applied to simulate the specimen in this study. Different welding sequence were investigated at some points of Model to obtain to uniform temperature distribution and reducing residual stress and distortion. The results indicate that different welding sequences affect greatly on temperature distribution but not on the maximum temperature.
کلیدواژه ها:
نویسندگان
Mohsen Khosravi Babadi
Amirkabir University of Technology(Tehran Polytechnic)
Sina Zandi
Islamic Azad University-central Tehran branch
Amin Rezvanpour
Malek Ashtar University of Technology