Heat transfer improvement in wavy wall channel using porous material -A study on porous layer location
محل انتشار: بیست و پنجمین همایش سالانه مهندسی مکانیک
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 462
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME25_185
تاریخ نمایه سازی: 13 شهریور 1396
چکیده مقاله:
Forced convection heat transfer inside a wavy channelpartially filled with a porous substrate is investigated. Finitevolume method is utilized to simulate this problemnumerically. The porous layer is mounted in two differentpositions (near the walls and at the core) inside the channel.The effects of both porous layer locations and amplitude ofwavy walls on heat transfer characteristics are studied forRe=500 and Darcy number between 10-6-10-2. Results areverified against an exact solution which indicate theaccuracy of the numerical investigation. The obtainedresults also indicate that the use of wavy walls when porousmaterial is placed at the center of the channel enhances heattransfer more predominantly when compared with the casewith porous material at the walls of the channel.
کلیدواژه ها:
نویسندگان
Mohsen Akbarzadeh
M. Sc. Student of Mechanical Engineering, Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
Mohammad Javad Maghrebi
Professor, Iran, Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran