Internal combustion engines in cylinder flow simulation improvement using nonlinear k-ε turbulence models
- سال انتشار: 1394
- محل انتشار: دو فصلنامه تحقیقات کاربردی در مهندسی مکانیک، دوره: 5، شماره: 1
- کد COI اختصاصی: JR_JCARME-5-1_006
- زبان مقاله: انگلیسی
- تعداد مشاهده: 327
نویسندگان
Department of Mechanical Engineering, Shahid Rajaee Teacher Training University, Lavizan, Tehran
Department of Mechanical Engineering, Tarbiat Modares University, Tehran
چکیده
The purpose of this paper is to studying nonlinear k-ε turbulence models and its advantages in internal combustion engines, since the standard k-ε model is incapable of representing the anisotropy of turbulence intensities and fails toexpress the Reynolds stresses adequately in rotating flows. Therefore, this model is not only incapable of expressing the anisotropy of turbulence in an engine cylinder, but also is unable to provide good performance whencomputing the swirling and tumbling flows is important in engine cylinders. Thus, in this paper, the results of nonlinear k-ε model are compared with thoseof the linear one. Results of diesel engine simulation with linear and nonlineark-ε models in comparison show that turbulence intensity in the nonlinear model simulation is higher than that of the linear model; also, nonlinear k-ε modelspredict the second peak value because of the bowl shape in expansion stroke for turbulence intensity. Gas injection results show that nonlinear turbulence models predict spray penetration accurately because of correctly turbulenceintensities predicting. Also, the results demonstrate that, for high pressure gas injection, turbulence intensity is high and predicted accurately using nonlinearmodels. Then, its spray penetration length is predicted accurately in comparison to experimental data’s. Although CPU time spending in the nonlinear model is more than that of the linear one, the non-linear stress model is found to increase computation time by 19%.کلیدواژه ها
Engine, Flow, Simulation, Nonlinear k-ε , Turbulence modelمقالات مرتبط جدید
- Emerging Trends and Applications of Machine Vision in Industrial Automation
- Experimental and numerical study on severe plastic deformation of pure copper using simple shear extrusion process
- بررسی اثر زبری سطح بر روی خستگی قطعات پلیمری تولید شده به روش پرینت سه بعدی
- Investigation of The PID Controller Gains Effect on Electronic Stability Program (ESP) Performance
- بررسی میزان باریک شدگی میدان کانال پیل سوختی و موانع حین حرکت جریان سمت کاتد در میزان و توزیع غلظت اکسیژن مرز کاتالیست
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.