Numerical Modeling of Local Scour at the Junction of Open Channels in Flow3D Numerical Model

سال انتشار: 1395
محل انتشار: ژورنال مهندسی عمران، دوره: 2، شماره: 9
کد COI اختصاصی: JR_CEJ-2-9_005
زبان مقاله: انگلیسی
تعداد مشاهده: 668

نویسندگان

Department of Civil Engineering, Yasooj Branch, Islamic Azad University, Yasooj, Iran.

Assistant professor, Department of Civil Engineering, Yasooj Branch, Islamic Azad University, Yasooj, Iran.

چکیده

At the junction of channels, the two corresponding flows of the main and submain channels are diverted from their main alignment and the form and the flow properties change at the junction. Changes in water level profile and depth of flow, velocity distribution, stagnation zone, constriction of public channel, energy loss and also formation of hydraulic jump are among the most important hydraulic variables in this location. For accurate recognition of hydraulic properties of flow and local scour at the junction of channels, physical models are made and constructed. Setting up a physical model requires many conditions and high costs which sometimes are not justifiable, hence appropriate numerical models could be proposed for such options. In this research using Flow3D numerical model, the numerical modelling of the flow has been performed in 3D form utilizing the available laboratory information which is calibrated and validated and accuracy of the numerical modelling, and the corresponding relative error are determined. The calibration and validation of the numerical model results demonstrate that the maximum relative error of the numerical model when simulating for maximum values of scour depth at the flow junction is equal to 8.2%. Also using the numerical model it was found that with passage of time in numerical model, from the start of scouring, the location of maximum scour is transferred towards the opposite wall of the sub main channel and is distanced from the junction position also the volume of sedimentation is increased and is translated toward the downstream main channel.

کلیدواژه ها

Local Scour; Channel Intersection; Numerical Modelling; Flow3D

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.