Output-only Modal Identification of beams with different boundary condition

  • سال انتشار: 1395
  • محل انتشار: چهارمین کنگره بین المللی عمران ، معماری و توسعه شهری
  • کد COI اختصاصی: ICSAU04_0853
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 510
دانلود فایل این مقاله

نویسندگان

M.R Davoodi

Associate Professor of Civil Engineering, Babol University of Technology, Iran

S.A Mostafavian

Assistant Professor of Civil Engineering, Payame Nor University, Sari branch, Iran

S.R Nabavian

Ph.D Student of Civil Engineering, Faculty Member, Tabari University of Babol, Iran

GH.R Jahangiry

M.sc. Student of Civil Engineering, Tabari University of Babol, Iran

چکیده

Structural Health Monitoring (SHM) evaluates the integrity of a structure by observing its dynamic responses by an array of sensors over time to determine the current health state of the structure. The most important step of SHM is system identification that in civil structures is identification of modal parameters of structures. Due to numerous limitations of input-output methods, system identification of ambient vibration structures using output-only identification techniques has become a key issue in structural health monitoring and assessment of engineering structures. In this paper, four beams with different boundary condition and with arbitrary loading have been modeled in finite element software, ANSYS, and the responses (Acceleration of nodes) have been achieved. By using these data and the codes written in MATLAB software, the modal parameters (natural frequencies, mode shapes) of the beams are identified with FDD (frequency Domain Decomposition) and PP (Peak Picking) methods and then justified with the results of input-output method which was determined by frequency relation function (FRF). The results indicate that there is a good agreement between three methods for determining dynamic characteristics of beams.

کلیدواژه ها

output-only analysis, modal identification, beams, PP, FDD

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.