DYNAMIC RECRYSTALLIZATION MECHANISMNAZ91 MAGNESUMALLOY SEVERELY DEFORMED BY BACKWARD EXTRUSION PROCESS

  • سال انتشار: 1390
  • محل انتشار: سومین کنفرانس بین المللی مواد فوق ریزدانه و نانوساختار
  • کد COI اختصاصی: UFGNSM03_098
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 519
دانلود فایل این مقاله

نویسندگان

A. CHALAY-AMOLY

School of Metallurgical & Materials Engineering, University of Tehran, North Kargar, Tehran, Iran

AZARE HANZAKI

Department of Metallurgical and Materials Engineering, University of Tehran, Iran

S. KHODDAM

Mechanical and Aerospace Engineering Department, Monash University, Clayton, Victoria, Australia

M. FATEMI-VARZANEH

Departmen ofMetallurgical and Materials Engineering, University of Tehran, Iran

چکیده

AZ91 (Mg-9Al-1Zn) cast alloy was severely deformed through backward extrusion processing at 450°C. The microstructure evolutions have been precisely investigated using optical microscopy and scanning electron microscope. A bimodal grain size distribution has been achieved where fine grains of 1-2 um mean grain size embedded within the elongated coarse grains. Different recrystallization mechanisms are found to occur during back extrusion of the experimental alloy. The new grains preferentially nucleated at the prior grain boundaries. The recrystallized grains are observed within twins and shear bands. The latter is considered as a result of extended dynamic recovery inside the bands which may lead to the formation of new grain boundaries. Moreover, the stimulated nucleation of new grains has been traced at the vicinity of y type precipitates. It is suggested that the fragmented precipitates into the finer particles may have remarkable pinning effect on the growth of new grains.

کلیدواژه ها

AZ91 alloy; backward extrusion; dynamic recrystallization; shear band; particle stimulated nucleation

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.