A NONLINEAR DYNAMIC BASED REDUNDANCY INDEX FOR REINFORCED CONCRETE FRAMES
محل انتشار: سومین کنفرانس بین المللی بتن و توسعه
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,685
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCD03_030
تاریخ نمایه سازی: 20 مهر 1387
چکیده مقاله:
In almost all codes of practice for seismic resistant design of buildings, a behavior factor is used to reduce design base shear. The behavior factor is affected by several parameters such as ductility, overstrength and redundancy reduction factors. There are two common approaches to assess the effects of redundancy on the strength of a structural system, which are as follows: Static Pushover Analysis
and Incremental Dynamic Analysis. The two indices: redundancy strength coefficient and redundancy variation coefficient have been introduced to measure these effects. Simplified methods are developed and presented to calculate these parameters. In this paper the redundancy strength and the redundancy variation parameters are evaluated for the reinforced concrete plane frames with different
number of stories, bays and ductility capacities. The investigations indicate that these two parameters are mainly the results of redundancy reduction factors.
کلیدواژه ها:
نویسندگان
A.A Fallah
Ph.D. Candidate, Science and Research Branch Islamic Azad University, Tehran,
A Sarvghad Moghadam
Associate Professor, Civil Engng. Dept., International Institute of Earthquake Engineering and Seismology, Tehran,
A Massumi
Assistant Professor of Structural Engineering, Graduate School of Engineering, Tarbiat Moallem University of Tehran (Kharazmi), Tehran,