Type Curve Development by Using Computer Programming
محل انتشار: دوازدهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,112
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC12_554
تاریخ نمایه سازی: 30 شهریور 1387
چکیده مقاله:
Type Curve Development is an application of computer programming in well testing as a common problem in oil industry. In this work, Diffusivity Equation with specified boundary and initial conditions were first solved using Laplace transformation. A numerical method, Stehfest Algorithm, was used to find inverse Laplace transformation. VISUAL FORTRAN programming software and EXCEL software were used to generate a beneficial program for one of the major well testing designers, type curve match process. Programming aimed to develop new precise and easy to use type curve for calculation of reservoir properties from well testing data. The type curve developed in this work was used to obtain reservoir parameters for an actual data set of pressure build up test from one of Iranian reservoirs. The same parameters were obtained using PANSYS SOFTWARE. The results were then compared to check the accuracy of type curve just developed. The results exhibited a satisfactory agreement with the results of PANSYS SOFTWARE.
کلیدواژه ها:
نویسندگان
Morteza Dejam
Department of Chemical & Petroleum Engineering, Sharif U of Tech, Tehran, Iran
Hasan Shojaei
Department of Chemical & Petroleum Engineering, Sharif U of Tech, Tehran, Iran
Abbas Helalizadeh
Department of Petroleum Engineering, Petroleum U of Tech, Ahwaz, Iran