Effect of PEGDMA on fracture toughness of resin modified glass ionomer cement

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 322

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISPST10_692

تاریخ نمایه سازی: 6 اردیبهشت 1396

چکیده مقاله:

Resin modified glass-ionomer cements (RMGI), as good dental restorative materials, are hybrid of conventional glassionomers and composite resins. The formulation of thesematerials are usually consist of calcium fluoro-alumino silicate (CaFAlSi) glass powder, water, poly acids and watersoluble methacrylate monomers such as 2-hydroxyethyl methacrylate (HEMA). These materials harden by two different mechanisms simultaneously; partly via an acid-basereaction and partly via a photochemical (visible light) freeradical polymerization process. Despite the unique propertiesof these hybrid materials such as good hardness, high dimensional stability, good adhesion to the tooth structure, no shrinkage, no exothermic reaction and no free monomer in theset matrix, they still suffer from some low mechanical or physical properties including moisture sensitivity, lowresistance to wear and pressure, low tensile and flexural strengths and higher tendency to fracture as compared to amalgam. In this study, in order to improve the mechanicalproperties of resin modified glass-ionomer cements, different amounts of polyethylene glycol dimethacrylate (PEGDMA)were added to the formulation of the cement and fracture toughness samples were investigated. According to theobtained data, the fracture toughness was significantly improved.

نویسندگان

Maryam Karimi

Department of Polymer Engineering, Science and Research branch, Islamic Azad University,Tehran,Iran

Naghmeh Fazeli

Department of Polymer Engineering, Science and Research branch, Islamic Azad University,Tehran,Iran

Mohammad Atai

Iran Polymer and Petrochemical Institute, P.O.Box 14965/115,Tehran ,Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • C.A.Mitchell, W.H. Douglas, Y. S.Cheng, Dental materials journal, 15, 7-13, ...
  • E. Lihava, M. Jrie, N. Nagaoka, T. Y. Shiro, K. ...
  • H. Yucheng, Ch. H. Chen, Ch. L. Li, H. H. ...
  • K.V. Gupta, P. Verma, A. Trived, J. life sci., 3(1), ...
  • نمایش کامل مراجع