Effect of Ozone Degradation on Hyperelastic Properties of a Tire Sidewall Compound

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 462

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISPST11_149

تاریخ نمایه سازی: 6 اردیبهشت 1396

چکیده مقاله:

This research work is devoted to the study of the effect of ozone degradation on the hyperelastic behavior of a sidewall compound based on NR/BR blend. Two hyperelastic equations namely as Yeoh and Arruda-Boyce models were selected. Four rubber compounds in which all ingredients were kept similar except for paraffin wax were prepared and tensile tests were carried out on them before and after exposing to ozone. Paraffin wax is well-known for its anitiozonant effect. The parameters of the models were determined using uniaxial test data in conjunction with an appropriate curve fitting method. It was shown that the parameters of these models changes significantly with ozone and wax content. The initial shear modulus and chain extensibility factor were also calculated from the computed values of the model parameters. It was also shown that these physical parameters are directly related to the structure of the polymer chains and degradation occurred inside them

کلیدواژه ها:

Hyperelastic models - Ozone degradation - Tire sidewall

نویسندگان

Mir Hamid Reza Ghoreishy

Department of Rubber Processing and Engineering Group, Faculty of Processing, Iran Polymer and Petrochemical Institute, P.O. Box: 14975-112, Tehran, Iran.

Ghasem Naderi

Department of Rubber Processing and Engineering Group, Faculty of Processing, Iran Polymer and Petrochemical Institute, P.O. Box: 14975-112, Tehran, Iran.

Bahram Roohandeh

Department of Rubber Processing and Engineering Group, Faculty of Processing, Iran Polymer and Petrochemical Institute, P.O. Box: 14975-112, Tehran, Iran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Tse M. F., Ozone cracking and flex cracking of crosslinked ...
  • Yeoh, O.H., Some forms of the strain energy function for ...
  • Arruda E. M., Boyce M. C., A three- ...
  • dimensional constitutive model for the large stretch behavior of rubber ...
  • Abaqus, Version 6.12, 2012 ...
  • Iran Polymer and Petroch emical Institute, Tehran, Iran 6-9 October ...
  • نمایش کامل مراجع