Influence of the morphology on the dynamic mechanical properties of the PA-6/PVB blends
عنوان مقاله: Influence of the morphology on the dynamic mechanical properties of the PA-6/PVB blends
شناسه ملی مقاله: ISPST12_629
منتشر شده در دوازدهمین سمینار بین المللی علوم و تکنولوژی پلیمر در سال 1395
شناسه ملی مقاله: ISPST12_629
منتشر شده در دوازدهمین سمینار بین المللی علوم و تکنولوژی پلیمر در سال 1395
مشخصات نویسندگان مقاله:
Ali Reza Zanjanijam - Engineering faculty, Iran Polymer and Petrochemical Institute, Tehran Iran
Shokoufeh Hakim - Engineering faculty, Iran Polymer and Petrochemical Institute, Tehran Iran
Hamed Azizi - Processing faculty, Iran Polymer and Petrochemical Institute, Tehran iran
خلاصه مقاله:
Ali Reza Zanjanijam - Engineering faculty, Iran Polymer and Petrochemical Institute, Tehran Iran
Shokoufeh Hakim - Engineering faculty, Iran Polymer and Petrochemical Institute, Tehran Iran
Hamed Azizi - Processing faculty, Iran Polymer and Petrochemical Institute, Tehran iran
Immiscible PA-6/PVB blends with different content of waste PVB were melt processed and their dynamic mechanical properties were studied. According to the DMA curves, the blends with dropt-matrix morphology showed a typical decrease in storage modulus relative to the pure PA-6, while a significant drop was observed for the blend with a co-continuous morphology. On the other hand, behaviors of the curves were changed from polyamide-like form to the PVB-like one. In fact, due to the morphology evolution, PVB phase had a higher effect on final modulus of the system
کلمات کلیدی: morphology- dynamic mechanical properties- polyamide-6- PVB
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/578516/